Solignum Interior Flat Latex 170

Chris and Colin’s Description/Recommendation
Solignum Latex Flat is a competitively priced latex flat, which is sold mainly for Ceilings. It can be used on Walls where washability is not a concern. It is a good product for spraying, however we do recommend the 9450 series if rolling over head. Available in 3.78l and 18.9l size. Brush Roller and Spray Application
Manufacturer’s Specifications
Ideal for: | Interior, primed gyproc, cement and masonry. |
Features: | Durable flat finish. |
Surface Preparation: | The surface must be clean, dry and free of dirt, wax and grease. Remove any loose, flaking or peeling areas. |
i) Previously Painted Surfaces: Wask with TSP solution and rinse well with water. Lightly sand to create a smooth surface. | |
ii) Metal: Prime with a quality metal primer | |
ii) Gyproc: Allow 48 hours for joints to dry. Follow with a primer/sealer for gyproc #175 | |
ii) New Wood: Fill in crevices and cracks with shellac and prime with an acrylic or alkyd primer. | |
Application Procedures: | Brush, Roller or Spray application is suitable. |
Limitations/ Precautions: |
Keep from freezing. Apply only if temperatures are between 10º - 35ºC (50º - 100ºF). Allow to cure at least 7 days before washing. Wash with a mild detergent and soft cloth. Abrasive cleaners are not recommended. |
Reduction Solvent: |
Water |
Clean-up: | Warm, soapy water |